To achieve similar results, follow the below mentioned steps:

• Thoroughly mix 2 parts in weight of EPOXY RESIN TRD 201 Part A with 1 part of EPOXY RESIN TRD 201 BROWN Part B
• Coat the stone surface with SAMRAT EPOXY RESIN TRD 201
• Ensure to coat the surface in a wiping motion to fill all surface deformities
• Allow approximately 24 hours for EPOXY RESIN TRD 201 to cure
• Grind the stone surface using appropriate set of abrasives
• Apply SAMRAT COLOR CONVERTER O’RED on a clean and dry stone surface using a cotton roller and allow it to dry
• Ensure to apply COLOR CONVERTER O’RED in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Coat the stone surface again with SAMRAT EPOXY RESIN TRD 201 using a cotton roller
• Ensure to apply EPOXY RESIN TRD 201 in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Allow approximately 24 hours for EPOXY RESIN TRD 201 to cure
• Polish the stone using appropriate set of abrasives