To achieve similar results, follow the below mentioned steps:

• Grind the stone using desired set of abrasives
• Thoroughly mix 2 parts in weight of EPOXY RESIN TRD 201 Part A with 1 part of EPOXY RESIN TRD 201 Part B
• Coat the surface with SAMRAT EPOXY RESIN TRD 201
• Ensure to coat the surface in a wiping motion to fill all surface deformities
• Allow at least 24 hours for EPOXY RESIN TRD 201 to cure completely
• Apply another coat in similar fashion to fill and repair any remaining surface defects
• Allow at least 24 hours for EPOXY RESIN TRD 201 to cure completely
• Polish the stone using appropriate set of abrasives