To achieve similar results, follow the below mentioned steps:

• Grind the stone surface using desired set of abrasives
• Thoroughly mix 2 parts in weight of EPOXY RESIN TRD 201 Part A with 1 part of EPOXY RESIN TRD 201 Part B
• Coat the stone surface with SAMRAT EPOXY RESIN TRD 201 using a cotton roller
• Ensure to apply EPOXY RESIN TRD 201 in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Allow approximately 24 hours for EPOXY RESIN TRD 201 to dry and cure
• Polish the stone using appropriate set of abrasives