To achieve similar results, follow the below mentioned steps:

• Grind the stone using desired set of abrasives
• Thoroughly mix 3 parts in weight of EPOXY RESIN 920 Part A with 1 part of EPOXY RESIN 920 Part B
• Coat the surface with SAMRAT EPOXY RESIN 920
• Ensure to coat the surface in a wiping motion to fill all surface deformities
• Allow at least 24 hours for EPOXY RESIN 920 to cure completely
• Apply another coat in similar fashion to fill and repair any remaining surface defects
• Allow at least 24 hours for EPOXY RESIN 920 to cure completely
• Polish the stone using appropriate set of abrasives