To achieve similar results, follow the below mentioned steps:

• Grind the stone surface using desired set of abrasives
• Apply SAMRAT COLOR CONVERTER O’RED on a clean and dry stone surface using a cotton roller and allow it to dry
• Ensure to apply COLOR CONVERTER O’RED in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Thoroughly mix 3 parts in weight of MORE GLOW O’RED Part A with 1 part of MORE GLOW O’RED Part B
• Coat the stone surface with SAMRAT MORE GLOW O’RED using a cotton roller
• Ensure to apply MORE GLOW O’RED in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Allow approximately 24 hours for MORE GLOW O’RED to dry and cure
• Polish the stone using abrasives of grit size greater than 400