To achieve similar results, follow the below mentioned steps:

• Grind the stone surface using desired set of abrasives
• Apply SAMRAT COLOR CONVERTER BLACK on a clean and dry stone surface using a cotton roller and allow it to dry
• Ensure to apply COLOR CONVERTER BLACK in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Thoroughly mix 3 parts in weight of EPOXY RESIN 920 Part A with 1 part of EPOXY RESIN 920 Part B
• Coat the stone surface with SAMRAT EPOXY RESIN 920 using a cotton roller
• Ensure to apply EPOXY RESIN 920 in straight long swaths in two mutually perpendicular directions along the surface of the stone
• Allow approximately 24 hours for EPOXY RESIN 920 to dry and cure
• Polish the stone using appropriate set of abrasives